Identifying Set-up Parts
Review the assembled units visual diagram to help you better identify the name of bidet parts that you need help with.
Sink Setup Parts
The left hose and valve underneath the sink is the Cold Water Hose and Valve. The right hose and valve is the Hot Water Hose and Valve. For Hot Water bidet installations (as well as alternative bidet installations) access is required at the connection between the hot water sink valve and the hot water hose sink supply hose. This is where the hot water bidet's Hot Water T-Adapter is installed.
Toilet Setup Parts
In standard installations, the bidet's Cold Water T-Adapter is installed at the connection between the Toilet Tank's Fill Valve and the Toilet Tank Water Supply Hose that connects toilet tank to the Toilet Tank Water Supply Valve on the wall. The T-Adapter connects to the Bidet Control Panel using the Cold Water Bidet Hose. If the bidet supports hot water wash modes, the rubber Hot Water Bidet Hose will also connect to the Control Panel from the sink.
NEO Bidet Parts
The NEO Bidet Attachmenet Plates refer to the two large circular plates in the main body, that can be adjusted to fit most toilet setups. The Nozzles, both rear wash and feminine wash, are located beneath the bidet body. The Nozzle Guard Gate is placed in front of the nozzles, and each nozzle has one Nozzle Cap. The bidet knobs are located on the Bidet Control Panel, and the Bidet Inlet is located behind the Bidet Control Panel.