Bidet Attachment Fit Chart
NEO Plus Bidets are designed to fit most standard North American toilets. Use the chart below to check if a NEO Plus Bidet fits your toilet. All measurements are in inches.
Distance Measured | Min. (inches) | Max. (inches) |
---|---|---|
Center of Toilet to Wall | 10.71 | N/A |
Center of Toilet to Edge of Toilet | N/A | 7.35 |
Distance Between Toilet Screws | 3.94 | 7.09 |
Screw to Edge of Toilet Bowl | 1.76 | 3.91 |
NEO Bidet Attachment Fit Chart
NEO Bidets are designed to fit most standard North American toilets. Use the chart below to check if a NEO Bidet fits your toilet. All measurements are in inches.
Distance Measured | Min. (inches) | Max. (inches) |
---|---|---|
Center of Toilet to Wall | 11.5 | N/A |
Center of Toilet to Edge of Toilet | N/A | 7.75 |
Screw to Toilet Tank | 1 | N/A |
Screw to Edge of Toilet Bowl | 1.25 | 3.5 |
Between Two Screws | 3.5 | 8.25 |
Set-Up Checklist
90% of LUXE customers in North America are able to install the NEO Bidet with the original, provided parts. In the rare event that your toilet setup requires different parts, use our interactive guide below to check what parts you may need!
Pre-existing installed NEO Original parts have different threads from NEO Plus parts. It is suggested to install your NEO Plus with its included parts.
2. Is your toilet's water supply hose flexible? (See B in diagram)
HOW TO CHECK
Upon removing your toilet tank water supply hose (B), if you can move it to fit the provided T-Adapter, which is 2.5 inches in height then it is flexible.
3. What is the distance between your toilet tank's fill valve (See A in diagram) and the inner edge of your toilet bowl?
HOW TO CHECK
Measure the distance from your water source to the indicated dashed line below. This is approximately where the bidet will sit.
2. Do you have access to either your toilet's water supply valve (see C in diagram) or your cold water sink's supply valve (see D in diagram)?
All Good to Go!
Based on your toilet measurements, the parts included in the original bidet kit will fit your setup perfectly!
Shop our bidets and you’re all good to go!
Explore All
NEO Bidets
Learn more about our NEO Series Bidets and which one is most suitable for you.
SHOP ALL NEOYour Set-Up Requires Other Installation Accessories
Fear not, we're here to help! 💪
We are always happy to supply alternative parts to NEO Bidet owners.
The parts required for your installation are listed below.
Already a NEO Bidet owner?
Contact us here to receive these free alternative parts:
NEO & NEO PLUS
Flexible Water Supply Hose
Replaces your rigid toilet tank water supply hose to allow space for the T-Adapter
NEO PLUS
2-ft Metal Cold Water Hose
A longer alternative hose to the shorter, original 15-inch Metal Cold Water Hose
NEO & NEO PLUS
1/2” Cold Water Metal T-Adapter
An alternative sizing to the bigger, original 7/8" Cold Water Metal T-Adapter
3. What is the distance between your preferred source (C or D) and the inner edge of your toilet bowl?
HOW TO CHECK
Measure the distance from your water source to the indicated dashed line below. This is approximately where the bidet will sit.
Sorry, NEO Bidets Need Water!
It seems like there's no accessible water supply for you
to connect a NEO Bidet to at the moment.
Check Out Other Ways to Upgrade Your Bathroom
Your Set-Up Requires Other Installation Accessories
Fear not, we're here to help! 💪
We are always happy to supply alternative parts to NEO Bidet owners.
The parts required for your installation are listed below.
Already a NEO Bidet owner?
Contact us here to receive these free alternative parts:
NEO Fit Guide FAQ
Can't find your question?
GET HELP WITH
Product Registration
Extend the standard 18-month warranty by an additional 6 months when you register your LUXE product.
How to Use A LUXE Bidet
First time? No problem, we've got your rear covered. Read our First Experience & Bidet Care Guide.
Installation Guide
Ready for a better bathroom experience? Complete your set-up in 15 minutes with our visual guide.